Metal structure, high strength, beautiful appearance.

The detachable, mobile and convenient.

It is suitable for all kinds of softwood and hardwood timber drying, insecticidal.

The box dimension is only for reference, according to user needs to be designed.

May according to the user needs to design a furnace two box or a large box.

Because of the continuous improvement of technology, parameter changes to actual condition.

Wood drying equipment series heat source is introduced

Wood drying special heat source, internal heat exchange tube is the use of high-tech materials, the key parts of the equipment of heat exchange tubes at high temperature in a melt state, refractory material not to drop, effectively solve the problem of thermal expansion, thereby greatly prolongs the service life of heat exchange tube, so that the device heat exchange efficiency can reach above 76%; at the same time the equipment in the steam generating device can generate enough steam drying of wood, I plant with the drying process, so that the wood to reach the short drying period and the minimum drying defect.

Working principle.

Hot air ( steam ) for wood drying equipment, drying a variety of species, a variety of specifications, various uses of wood, with high efficiency and energy saving, safety and reliability, short drying cycle, good drying quality, drying and low cost advantages, is widely used in large, medium, small timber processing enterprises, especially suitable for operating wood products export business of the manufacturers. HXM series of wood drying equipment, during normal operation, full combustion of fuel in the combustion chamber, generating heat, heat drying system was fully absorbed the drying medium, generating 180 degrees Celsius temperature, in circulating fans, high temperature air flow through the control system, transportation system, the high temperature hot air conveying to the drying chamber the wood drying process. At the same time device on a steam generating device, can produce large quantities of atmospheric steam drying process, according to the requirements, timely to the vapor into the drying chamber, wood steam injection, conditioning, humidity adjusting system is a independent steam system, equipped with safety device. The saturated wet steam in a short period of time to make the wood surface temperature and internal humidity tends to be consistent, so as to achieve the wood interior and exterior and the purpose of drying of solid, heavy, hard, thick wood, can be used to solve the discontinuous heating drying process, drying of wood in the process of inner crack, crack, deformation of end the quality defects, greatly improving the rate of finished wood. Wood drying equipment with energy recovery system, greatly reduce the drying cost, shortens the drying cycle. When the wood moisture content below 15%, after 6-8 hours of high-temperature dry steam, can be parasitic in the wood borers and eggs all all except death, resolved by the moth and adverse effects, for enterprises to improve the economic benefit.

Control device

Equipment of the wind inlet pipe and return pipe are provided with adjustable valve, according to wood drying process requirements, at any time on the intake air and cyclotron volume adjustment. In the air inlet of the fan is also provided with adjustable compensation, according to the regulation of drying room air pressure and air quantity. In the apparatus body is equipped with a steam spraying control valve, according to the different needs of wood drying, timely adjustment of steam injection volume. In the apparatus main body lower part is also provided with combustion-supporting device, when the fuel for a variety of reasons not easy to burn. Can open the valve to increase the combustion combustion strength, reach each stage of drying temperatures needed.

The main characteristic of the products:

1 using a cyclotron heating device, a combustion chamber, heat transform chamber, a steam generating device, combustion device, fan, spray desulfurization dust remover, chimney and other components. High efficiency and energy saving, high heat energy conversion efficiency.

The 2 needed for the combustion of fuel with wood shavings, sawdust, wood waste, coal etc..

3 features a unique steam generating device, ensure adequate supply of steam drying kiln drying stage, because of the large amount of steam into the interior, increase indoor humidity to prevent deformation, dry wood.

4 dried wood has short drying cycle, low cost, uniform drying, good effect, solves the wood drying process appeared in the internal crack, fracture, surface crack, deformation, discoloration defects.

5 can be in accordance with the requirements of design into a furnace two drying room conveniently rotation operation.

The 6 can be combined with the original clay to undertake technical reformation, saving equipment investment.

7 overall device is easy to operate, safe and reliable.

8 the equipment suitable for drying various wood, is the furniture factory and wood products plant, soil drying kiln and drying equipment for the ideal replacement of old